Is your outdated fireplace looking over-tired and out of date? Stone veneer can make a substantial impact in the look and feel of your home and transform your current fireplace into a masterpiece. See How To Remodel Your Outdated Fireplace With Manufactured Stone Veneer in this article!
Selecting your Stone. Stone veneer is available in a number of distinct shapes and colours. The fabricated stone veneer that you pick will be set by the design style which you’re trying to attain. The rock veneer you choose will have a massive influence on the general look and texture of your project, whether or not you are opting to get a classic farmhouse design or maybe a modern compact appearance. The web makes searching for house layout fashions simpler than ever.
It is possible to find lots of layout and home improvement sites online which can help you pick the manner of stone which may work best for the job. Invest a little time and select your gems carefully, since it’s hard to change after the job is finished and everything is set up. It is recommended that you ask a sample or samples of those manufactured stone you have chosen, this will allow you to find the real color variants and fit them up with the present design on your residence.
How To Remodel Your Outdated Fireplace With Manufactured Stone Veneer
Things to Think about. We strongly suggest that you mount your new mantel prior to the setup of your manufactured rock (A brand new mantel is discretionary, nearly all individuals use their present mantels). Installation of a brand new mantel after the simple fact is often tricky as a result of trimming and cutting of the rock which will have to get performed on the walls. Because of the unevenness of rock products, It is also not suggested to set up your new mantel into the surface of the stone that is manufactured.
The majority of the dust and debris ought to be removed from the region you’re incorporating your gems to before placing your rock veneer. The bond between the rock veneer and the setup surface might be mitigated with any present dust and grime.
If you want to lift your stone veneer installation to the ceiling, then you have the choice of building the wall out liner over your present fireplace. Build a timber construction to your preferred dimension and anchor it to a wall. (Please notice: Installing the scratch coating and rock will include greater measurement and ought to be considered while building your chimney).
Sheathing Setup. A layer of sheathing should be set over the timber framework. You are able to buy several distinct types of sheathing which might be utilized for example: particle board or cement board. The most traditionally employed sheathing for this sort of program is plywood. The lath should overlap at least two in on the flat and vertical seams.
Put in a minimal 3/8″ thick covering of mortar on the lath using a mason’s trowel. Ensure the lath is completely coated with mortar to permit for scoring of the surface. The mortar has to be implemented with considerable pressure and depth to completely embed the lath. The minute the mortar is thumb print difficult, scratch the face with a notched trowel, scarifier or scrap piece of lath to make a scratch coating.
Shortly after the scratch coat cures (allow at least 24 hours) and until the rock is set up, snap 8″ chalk lines throughout the wall with the aim of suitable horizontal positioning of rock (this measure doesn’t apply if implementing irregular shaped stones). Employ a couple of corner stones in the bottom corner of the wall.
Insert mortar into the back of your rock and work it in the wall using a sideways movement to make a bond. There’s a brief and long reunite for all corner rock. The yields must alternate in other ways on the wall’s corner remaining inside the chalk lines. Continue with the program by installing horizontal rocks from those corner bits. Every extra course that is installed will start with a foundation.
Stone Veneer is readily shaped and cut as desired. This will let you fit stones readily into position, insuring a natural looking wall with tight mortar joints. Trimming or forming could be accomplished by using both of these tools: 4″ hand-held disk grinder with diamond blade, nippers or a wet saw. Do not forget to always wear safety eye glasses when cutting stone. Enjoy your beautiful new rock fireplace!