Electric kettles are tremendously popular since they can boil water considerably quicker than the usual stove-top kettle. Additionally, using this particular kitchen appliance rather than a microwave can also be a more efficient approach to wash your water.
How To Clean Electric Kettle
But as mineral deposits from hard water may frequently cause scaling, it may influence the functioning of the machine and deteriorate the quality of the water. Thus, cleaning an electrical kettle regularly is extremely important to make it operate and it may also also increase its lifespan.
Tough water build-up, or limescale as it is often called, is that the white powdery residue which are observed within an electrical kettle in regions where the water stays standing. Hard water includes high levels of minerals like calcium and magnesium and may be a serious pain to remove if left untreated. When water is pumped in an electrical kettle, these minerals don’t evaporate as the water does but rather stays in the kettle. Because of this, this build-up is made in the base of the kettle which hardens as it starts to dry.
Luckily, it’s possible to eliminate this build-up by simply using something which is mildly acidic such as vinegar, citric acid or lime juice. At least one of these acids will immediately eliminate the marginally akaline tough water stains.
- Blend equal amount of vinegar and water and fill around half pot together with the solution.
- Boil the solution from the pot and turn off the pot.
- Permit the solution to remain in the kettle for approximately 10- 15 minutes. Pour away the solution and wash the appliance.
- Scrub the pot several times to eliminate any of the vinegar out of the pot.
- Use a clean cloth to wash the pot inside out.
- Following the pot dries, boil water from the pot once more to remove the residual traces of vinegar fully.
Using Lime or Lemon Water
- Prepare a mix of approximately 500 ml (2 cups) of water and approximately 30 g (1 oz ) of lemons or lime.
- Boil the prepared mix from the pot for approximately 20- 25 minutes.
- Drain the solution in the pot. Unplug the pot and let it cool down.
- Wipe the residual hard water residue in the pot employing a tiny quantity of soda bicarbonate onto a moist cloth.
- Scrub the pot at least 4-5 days with clean water before using it .
With Lemon Slices
- Slice fresh lemons following juicing it.
- Fill the pot halfway with water.
- Remove the lemon slices and then drain the water out of the pot.
- Rinse the pot thoroughly and rinse using a soft wash cloth.
Tips for Cleaning an Electric Kettle
- Should you find it tough to eliminate the stubborn residue, then prepare a more powerful mix of vinegar and permit it to remain within the pot overnight.
- To eliminate hard water residue thoroughly after every technique of descaling, sprinkle some baking soda at the pot and scrub the interior of the pot lightly with a cloth or damp sponge.
- Avoid scrubbing the heating area as it might get rid of the particular coating designed to safeguard it.
- To eliminate scale build-up around the filter, then soak the filter in a cup of vinegar to get a couple minutes to loosen this up.
- Avoid allowing water to take a seat within the pot for protracted intervals.
- Avoid immersing the electrical kettle in water fully since this might damage the heating elements.
Using the easy methods listed above will help you keep your electrical kettle and keep it functioning and working like new. While cleaning and descaling the interior of your pot should be done every couple of months, some may reside in regions which have more difficult water and might want to wash their pot on a more regular basis. Always keep in mind that a fresh kettle is really a green pot, because it not only uses less energy but also increases the life span of your electrical kettle. It’s also healthier for you and your loved ones as well to keep a clean pot.